What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 02.07.2025 04:49

For this case there are devices called Metal oxide varistors (MOV).
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
These devices are installed between the “hot” and “neutral” and protective ground.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Upvotes:
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Elly De La Cruz throws out Javier Baez with mind-boggling 98 mph throw - New York Post
He then asserts :
[image of Common-mode choke]
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Bruins Hire Former Forward Marco Sturm As New Head Coach - NESN
At least they know the answer if they wanted it.
An AC voltage/ current source, and an ac inductive load.
This device then solves the entire problem.
Recursion lays off 20% of staff in wake of pipeline cutbacks - Fierce Biotech
nine
The other is “what does a “fuse” do?”
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Librarians breathe easy as tool spots toxic book pigment - The Times
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
but this device (an Inductor) … impedes the rapid changes in the current.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
He then describes the function of a fuse.
The third is lightning and “how it gets conducted into a home.”
But… the neutral is now “floating” because of the 1 ohm resistance.
Red Sox To Acquire Jorge Alcala - MLB Trade Rumors
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
the problem then depends on "how fast does the fuse operate?".
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Do you think Japan will have same-sex marriage by 2030?
2024–10–10[John johnson John Johnson ]
One
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Have you ever had a bad gut feeling about someone and it was right?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Here is a simplified AC power diagram.
[old diagram got deleted by accident]
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This is 'the assistant's answer'
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
What are some other ways to say "you're welcome" in French besides "de rien"?
It seems Mohan does not understand the difference between a comment and an Answer.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
The bolt then partially travels down the line to your home.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Opinion: The secret to a longer life could be this old-fashioned English breakfast - MarketWatch
but I think this circuit , shows a few more pieces.
so, what happens?
This one hit behind the barn.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is where the MOV conducts again, and dissipated the energy.
2024–10–16 [ OO OLAOYE OYEBODE ]
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
eight
Edit 2024–10.
At one ohm, the resistor has a maximum of 1 watt power.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
a photo is worth a thousand words.
What does a fuse do?
In schematic diagrams this is the symbol for a fuse:
The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–10–14 [Omar Gharbi Omar Gharbi ]
So, the voltage could go up to 500 volts, and the fuse will not open up.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
I post the exact comment here.
Because the load is inductive, the current lags the voltage.(by a bit).
what exactly is a ‘surge’ protector?
But it can get overloaded, and no longer works.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
There are two important concepts here.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
A fuse is a non-resetable over current circuit protector.
There are three different concepts here that are getting confused.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
It also is a device that limits the change in current flow.
Now when you have a certain ac resistance, then a current flows in a loop.
He then describes Rainy Season and Lightning.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
One is “what exactly is in a ‘surge protector’ ? ”
Barnstars:
These are simplified answers to the original question, and does not change anything I wrote above.
A circuit breaker is similar, but is resettable.
(Dc diagram shown, AC is similar).
First Sentence:
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
What is lightning?